Week 12
Wed, Mar 4 CW – Image and description of completed classwork
No work.
Tue Mar 3 CW – Image and description of completed classwork
No work.
Mon, Mar 2 CW – Image and description of completed classwork
No work.
Week 11
Sat, Feb 28 CW – Image and description of completed classwork
I have finished my pencil box but have not yet completed glueing my desktop organizer and LED lamp.
Sat, Feb 28 HW – Image and description of completed homework
No homework.
Thur Feb 26 CW – Image and description of completed classwork
No classwork.
Thu, Feb 26 HW – Image and description of completed homework
No homework.
Tue, Feb 24 CW – Image and description of completed classwork
Today in class, I sanded the base of my LED lamp and practice wiring.
Tue, Feb 24 HW – Image and description of completed homework
No homework.
Week 10
Fri, Feb 20 CW – Image and description of completed classwork
Today in class i assembled both my pencil box and my LED lamp parts.
Fri, Feb 20 HW – Image and description of completed homework
No homework.
Wed, Feb 18 CW – Image and description of completed classwork
In class, I printed out the final side of my model and the base.
Wed, Feb 18HW – Image and description of completed homework
No homework.
Mon, Feb 16 CW – Image and description of completed classwork
In class, I printed the first three sides of my model.
Mon, Feb 16 HW – Image and description of completed homework
No homework.
Week 9
Thu, Feb 12 CW – Image and description of completed classwork
In class today, I completed the contrast in colors in my photos and next class, I will print out my parts and construct them together.
Thu, Feb 12 – Image and description of completed homework
No homework.
Tue, Feb 10 CW – Image and description of completed classwork
In class today, I started drawing in illustrator and will continue in the next class.
Tue, Feb 10 HW – Image and description of completed homework
Today for homework, I attached the bottom to the model and in class I will start designing the artwork on the model.
Week 8
Sat, Feb 7 CW – Image and description of completed classwork
Today in class, I worked to complete the standard box in order to put my designs on it. For homework, I will use the combine and joint command to combine the bottom to the rest of the model.
Sat, Feb 7 HW – Image and description of completed homework
No homework.
Thu, Feb 5 CW – Image and description of completed classwork
Today, I cut out the rest of my parts in my desktop organizer.
Thu, Feb 5 HW – Image and description of completed homework
No homework.
Week 7
Thu, Jan 29 CW – Image and description of completed classwork
In class, I printed out half of my parts of my desktop organizer.
Thu, Jan 29 HW – Image and description of completed homework
No homework.
Tue, Jan 27 CW – Image and description of completed classwork
Today, I made the small vertical triangles using the copy and paste command.
Tue, Jan 27 HW – Image and description of completed homework
For homework, I used the joint and combine commands to make the front vertical and the large angles and in class I will work to make the small angles.
Week 6
Fri, Jan 23 CW – Image and description of completed classwork
Today, I modeled the back, bottom, extruded the front, and started to make the joints on the inside of the model. For homework, I will complete the model so that I am able to start constructing next class.
Fri, Jan 23 HW – Image and description of completed homework
Today for homework, I completed the front side of the model and used my trimming and dimension tools a lot. In class, I will work to model the back of the project.
Wed, Jan 21 CW – Image and description of completed classwork
Today in class, I started on the front of the model and ran into some trouble with constraints that were accidentally put in when drawing my line. Therefore, I had to remove those constraints to be able to set the distance between each line. For homework, I will complete the front and back and either move onto the bottom or do that during next class period.
Wed, Jan 21 HW – Image and description of completed homework
For homework, I completed the left and right side and used the joint command to set them to the correct distance.
Week 5
Sat, Jan 17 CW – Image and description of completed classwork
Today I divided the parts using deminsions and am close to completing the left side.
Sat, Jan 17 HW – Image and description of completed homework
No homework.
Thu, Jan 15 CW – Image and description of completed classwork
Today in class, I printed my base plate, glued the verticals, and started the modeling of our next project. For homework, I will work as far as I am able to in the next project.
Thu, Jan 15 HW – Image and description of completed homework
No homework.
Tue, Jan 13 CW – Image and description of completed classwork
Today, I finished attaching the magnets to my arms and glued the pieces together. Next class, I will print out my base plate and hopefully glue all three parts together for my final result.
Tue, Jan 13 HW – Image and description of completed homework
No homework.
Week 4
Fri, Jan 9 CW – Image and description of completed classwork
Fri, Jan 9 HW – Image and description of completed homework
Today, I completed the base plate and extruded pieces to make dimension.
Wed, Jan 7 CW – Image and description of completed classwork
In class, I worked to extrude the holes into my lower arm and started working on my base plate. I plan to continue offsetting the parts on my plate.
Wed, Jan 7 HW – Image and description of completed homework
Today, I cut the holes in the main arm and began on my base.
Winter Break 12/19/25 – 1/5/26
Week 3
Tues, Dec 18 CW – Image and description of completed classwork
Today, I cut the holes in the main arm and began on my base.
Thu, Dec 18 HW – Image and description of completed homework
Today, I cut the holes in the main arm and began on my base.
Tues, Dec 16 CW – Image and description of completed classwork
Today in class, we sanded down and glued magnets into our cut out design and continued on our lamp online design. I also cut holes into the lower arm.
Tue, Dec 16 HW – Image and description of completed homework
Today I completed the lower arm part and the lower arm horizontal. Parts of this were the homework/classwork for other class periods.
Week 2
Fri, Dec 12 CW – Image and description of completed classwork
Today for classwork, I followed along with the videos to create the lower arm side and made set the length and width for the arm in place.
Fri, Dec 12 HW – Image and description of completed homework
Today for homework, I cut holes in the upper arm side and set them an equal distance from each other and created the large and small metal plates.
Wed, Dec 10 CW – Image and description of completed classwork
Today for homework I made the horizontal piece of the upper arm of our LED lamp and cut the extra material to make it even.
Wed, Dec 10 HW – Image and description of completed homework
Mon, Dec 8 CW – Image and description of completed classwork
Today we cut holes into the design and duplicated our sketch to make two sides.
Mon, Dec 8 HW – Image and description of completed homework
Today for homework we watched a video and completed the sketch of the upper arm side of our LED lamp. Next video, we will cut into our sketch to show dimension.
Week 1
Fri, Dec 5 CW – Image and description of completed classwork
Today, we learned how to make a design box with certain dimensions, holes, and components such as handles and writing on sides.
Fri, Dec 5 HW – Image and description of completed homework
Wed, Dec 3 CW – Image and description of completed classwork
I designed a 2.60in by 2.50in cube and learned how to save the project to my folders.
Wed, Dec 3 HW – Image and description of completed homework