Lville Design

Lville Design

Design Rubric

Collen L.

Classwork 3/29/22
Classwork 3/29/22

HW – 3/31/22

4/1/22 classwork
4/4/22 Homework
Homework 4/5/22
Classwork 4/5/22 – In todays class I assembled the lower arm with the metal plates using the joint command. Tonight for HW I will be extruding the lower horizontal
Homework 4/7/22 – For hw I created the lower arm horizontal by extruding and using the combine/cut tool.

CW 4/8/22 – Downloaded parts from the Blog and also started laser cutting my upper arm
HW – 4/11/22 – Added the rectangles and holes
CW 4/11/22 – cut out the rectangles and circles and also sanded my upper arms
HW – 4/12/22 – Created the base and made the upper and bottom plate. Extruded and cut out parts of the base
cw – 4/15/22 – finished the model lamp. Added the base and added the screws
CW – 4/18/22 – drew the dimensions of the iphone
HW – 4/18/22 – Today for HW I sketched and extruded the base of the iPhone. I also created the sketch for the power button the side. Next in class I will work on the sketches for the volume buttons and the camera on the back
CW -4/19/22 – Today in class I first sketched out the button above the volume buttons then I extruded half of it and cut the other half. I then Sketched the volume buttons and extruded then. I then went to the bottom face of the phone and cut out the charging point after sketching it out.
Hw 4/21/22 – Today for homework I first completed the 3 speakers on the bottom of the phone and cut them and after that I sketched the camera and flash light and extruded both of them. Next I will be adding the picture on to the front of the phone to make it look like a real phone.
CW – 4/22/22 – Finished Iphone. In class today I first filleted the sides of the phone to make round edges. Then I added the face decal to the front and fit to scale. After that I used the appearance feature to to make the flash button on the back a whitish shiny color
Hw 4/25/22 – I created my four sketches for the phone stand. In class I will choose my final design and begin sketching.
Classwork 4/26/22 – I sketched my final design on paper then I starting sketching the design. After I extruded it I copied the component into a new component to make the 2 separate stands. Next I am going to create a piece to go in between the two
HW- 4/28/22 Added the upper clamp to the stand and extruded most of it. next, I will begin the wood led lamp

CW – 4/29/22 – I worked on laser cutting my LED LAMP but did not cut through the entire wood.

CW – 5/2/22 – I worked on laser cutting my LED LAMP but did not cut through the entire wood.

CW – 5/6/22 – Today in class I sketched the Lamp Bulb and revolved the whole thing. Next, I will work on the socket.
5/9/22 HW – Sketched my four designs for the lamp challenge. Next, I will choose my final design and start refining the measurements.
CW- 5/10/22 – I Printed my parts and sanded them. I then began to put the magnets in the side parts. Next, I will began designing my lamp on fusion.
HW – 5/12/22 – First, I sketches the lower base making an outer oval and an inner circle, and then extruded them. Next, I created a rectangle to extrude as the stand to hold the upper base. I then created the upper base and made another circular socket for the light bulb to go into.

CW – 5/13/22 – I mixed the two types of glues then added them to the magnets and let them dry.

HW- 5/13/22 – I first created two posts to hold the lampshade and added a hole for the screw to go in that holds the two together. After that, I created the lamp shade by extruding and hollowing out the inner portion.
CW – 5/14/22 – I glued together the upper horizontals and the plates to the base.
HW – 5/16/22 – I Added a design to the lower base of the lamp. After that, I imported a screw and jointed it to the post of the lampshade.
CW – 5/17/22 – I glued the lower horizontal and added a washer to my lamp design.
5/19/22 – hw – I added the washers to the screws and fixed some of the joints.

CW – 5/20/22 – I will be absent at my lax game

HW – 5/24/22 – I first filleted out every side of my lamp by 0.05 inches and fixed my joint between the washer and screw. After that I sketched my final lamp design sketch with all my measurements. I am now done with the lamp
CW – 5/25/22 – I added my white strip after screwing it together with my upper and lower arms. Then I worked on the lower base. Next I will soder.

HW – 5/26/22 – Completed Lamp.

CW – 5/27/22 – I completed the wood LED LAMP after sodering the wires and attaching the bottom plate.