Upper Arm Classwork March 29th, 2022Upper Arm Homeowrk April 1st, 2022Upper Arm Classowork, April 1st, 2022Lower Arm Homework, April 4th, 2022Small and Large Plate Homework, April 5th, 2022
Classwork
Learning to use the printing machine and other machines in the classroom, April 5th, 2022
Assembling Arm Joints Homework, April 7th, 2022. Downloading Parts Classwork, April 8th, 2022Homework Making Rotatable Arms, April 11th, 2022Assembling Base Plate, Homework April 12th, 2022Classwork, added missing part and now just need to assemble pieces together over the weekendClasswork, taking measurements of front of iPhone, April 18, 2022Classwork Back of iPhone, April 18, 2022 (sides, bottom, and top, and are same as the front, so only measured camera) Homework April 19, 2022, created body and extruded itClasswork, April 19, 2022. Today I added the power button, the bottom speakers, and the charging port to my iPhone. Next, I will be adding my volume buttons and doing the backHomework, April 22, 2022. Today I added my back camera and flash, as well as extruded it. Tomorrow in class I will be adding features to the front of the iPhone and finishing it!Today, I finished my volume buttons and added my decal. Now my phone is finished. Classwork April 22 2022Tonight, Homework April 26, 2022, I created 5 possible Cell Phone Stand Designs. Next, I will be working on the virtual model. Today I started my iPhone stand. I sketched it as well as extruded two pieces. Next I will join them.Homework April 29, 2022. Today I joined my pieces as well as create my base where my phone will stand. Next, I will be joining the base to the entire body.Today, in Classwork May 3, 2022, I added my base, rotated it, and inserted my phone. Next, I will be adding the final touches by changing exactly how high the phone sits.Classwork May 6th, 2022. Today we sketched out our lightbulb and then we revolved around it. Next we will be drawing sketches for homeworkTonight, Homework May 9, 2022, I created 4 sketches that could all be used. Next, I will narrow down my choices, and decide which one I believe would be most functional, as well as productive.Today, Classwork May 10, I created and extruded the base, as well as the same with the arm.Tonight I was not able to do much due to lack of time, but I began to make my lamp shade. In class I will be cutting itToday I went back to my virtual lamp, and fixed some errors then began to cut out the lower arm horizontal. Classwork 5/13/22Tonight for homework, 5/14/22, I placed my lamp shade above my lamp and created a table for the lamp to rest on. I will soon be finalizing the project./Today, Classwork 5/14/22, I went back to my LED LAMP and created the other base, as well as go back and make some corrections to the lamp body. Should be finishing up soon. Tonight, HW 05/16, I added joined a top piece to my lampshade. I also created a rod and extruded it, to then join that to the base and the bottom of the light bulb. Classwork May 17, 2022. Today, I spent my time adding some fishing touches to my LED Lamp and preparing to print my parts. Next Class, I will be printing them. Saturday, May 21 Classwork. Today, I worked on printing my parts but ran into a problem so I will need to re print some parts next classHomework due May 25. For my homework, I had to add some more parts to the hard drive and change some parts. Here they are all printed out.In Class today May 25, I began gluing my parts. Although it took a while to get my plates, I was able to glue them on, as well as get the parts onto the base.Second to last class, I got the bottom part of my lamp done.
To finish the year, I completed my LED Lamp, as well as my personal lamp, led lamp on fusion, my iPhone, and my iPhone stand. I feel as if I learned a lot in this course. Thank you for a great year Mr. Brodie. I do not have a picture of my Wood Lamp, but I wired it on the last day of class, and it is up and working!
