Tuesday April 18- I the past few class I have been trying to use Dall-E however the pictures do not come out.
Monday April 17- Tonight for Homework I loaded my photo so I can place it on the thumb drive in class tomorrow as well as put my sketches on a drive so I can print tomorrow.
Monday April 17- Today in class I downloaded all my sketches into one folder, Then downloaded my image off Dall-E and used a website to change it over then downloaded it. Class Tuesday April 11- Today in class I finished the droor, added 2 shelfs to complete the fusion copy. Homework for Tuesday April 11th- Tonight for homework I began sketching and extruding the droor for the bottom shelf. I created the 2 sides and bottom. Next I have to make the lower shelf and the front and back of the droor. Tonight Homework Wed April 5- Tonight for homework we were asked to get feedback from our clients. He liked the overall concept however would like to remove the divider on the middle shelf. He doesn’t like how it restricts how large an item that can’t fit in there with the divider up. He loves the custom last name plate, however doesn’t like where the #12 is located as when books are using that space you can’t see the number. Class Tuesday April 4th- today in class I worked with Mr. Brodie to fix the components as well as build my top shelf and put it in place. Monday April 3rd- Tonight for homework I cut out the places in which the shelfs will set as well as drew the scetchs and next need to extrude them. First Day of Class. Selfie with HarrisonStarted the process of the Upper arm. Sketched the Arm.Extruded the upper arm, as well as making a copy of the arm.Once I had the Upper arm sides created. I created the upper horizontal and then combined the upper arms together. Then cut out the parts so the upper arm was complete.Began the sketch of the lower arm. I then cut out the places where the lower horizontal will be.Tonight I created the small metal plate that will allow the upper and lower horizontal to form a joint.Today in class I extruded the lower horizontal. I also used the joint command and formed a joint with the lower and upper horizontal with small metal plates in between.
Tuesday December 13th built the lower back side and cut the wholes out
In Clasa Tuesday December 13th I built the Base plate which will be the base of the lamp.
Today in class I began the process of sketching my phone. I found the dimensions I need with my case on my phone.Sketch of the orthographic view of the front of my phone.Created the body of my phone first by sketching the phone then extruding. I then extruded the charging port in the bottom of the phone.Today I created the base verts that will attach the base plate to the lower horizontal.The Base verts got jointed onto the lower horizontal arm using the joint command.The Base verts were connected to the base plate. I then had to cut out the 4 rectangles where the base verts sit in on the base plateI the last couple class periods and consult periods I finished constructing the parts. I had to use the laser printer, sand down the parts then glue them together by using clamps. I also used screws to hold both the joints in place and the LED light cord. Tonight for homework I designed 4 different holders to hold my phone. All 4 of the designs are pieced together using the joint command. Finished product of my phone design. Since last uploaded picture i was able to create the speakers, volume and power buttons, the camera surface, as well as extrude the front part of the phone. Today In class I worked on building my base and extracting it as well as creating the arm that my phone will lean against. I used the rectangular pattern to cut out equal circles on the arm. Today in Class I combined the base and jointed the parts of the stand! Almost finished!
Today in Class, I sketched the base of the pencil box and extruded it. I then started working on the front part of the box.
Today In class I completed my adjustable phone holder. The arm is held in place by a rod as the base is combien together. It has 2 adjustable settings.
Tonight for homework I Recreated the bottom, back and front of the Pencil box(My Sketches Deleted while restarting fusion). I also cut out the places in which the materials will connect with each other.
Today In Class I sketched and extruded the left, right and both inside parts. I know have to joint the middle parts in.
Today In Class I completed the pencil box and will print it next period.
Today in class I printed my Box and glued it together. I used ruber bands to hold it together nice and tight.
Tonight for homework I began working on the Base of my self designed box. Next i need to cut out the spaces to let the sides joint as well as add the material thickness.
Today in class I extruded the Botton and back plate of the self design box!
Tonight In class I created the Front plate to my box and extruded it. I now need to make the sides.
Today In class I constructed both the left and the right side of the box and jointed them to the other parts.
Complete Pencil Stand!!!!
What do you need in your room to help organize yourself?
What would the dimensions need to be in order to fulfill your needs?
What image would you like to be printed on the holder?
What would be your ideal material for the project?
What style would you prefer
What are your primary needs in order for this organizer to be successful.
What items will be stored in the organizer and what would the mass of those materials be.
Are there any specific designs and or symbols you would like included.
What Items will be the most frequently used?
Tonight For homework I interview Brock Getson, a fellow woodhull house mate and got answers to my questions regarding his organizer.
When I interview Brock, the biggest need he faced in order to succeed at Lawrenceville was an organizer to store school supplies that he could easily grab and run to class. Due to the small size of his desk he has asked that we make the dimensions smaller to 12′ by 10′ by 12′ tall. With the design I plan to have one side as open space to store textbooks and binders, and use the other side as shelves as well as place droor. The top self will be the easiest to access, as it will be made to quickly grab smaller items quickly, where the drawer on the bottom will be used for items that are not used as frequently. I am going to place lacrosse sticks on the design to personalize it.
Today in class I began the body of the organizer as well as started the cardboard mock model.
