Week 12
Wed, Mar 4 CW – Image and description of completed classwork
Tue Mar 3 CW – Image and description of completed classwork
Mon, Mar 2 CW – Image and description of completed classwork
Week 11
Sat, Feb 28 CW – Image and description of completed classwork
Sat, Feb 28 HW – Image and description of completed homework
Thur Feb 26 CW – Image and description of completed classwork
Thu, Feb 26 HW – Image and description of completed homework
Tue, Feb 24 CW – Image and description of completed classwork
I acquired a base, sanded it down, put in the wire and soldered them for the LED Lamp. I finished all of my projects and brought them home.
Tue, Feb 24 HW – Image and description of completed homework
I have had some troubles the past few days saving my sketches. I created this from scratch and will ask about it in class.
Week 10
Fri, Feb 20 CW – Image and description of completed classwork
I glued together my Desktop Organizer. I put in the metal bars that keep the lower and upper arm connected, and the one that connects the lower arm and the base. I cut the LED strip and stuck it on the lamp.
Fri, Feb 20 HW – Image and description of completed homework
My sketch didn’t save, so I had to restart and make a new one. I used the triangle fill tool to make the mountains.
Wed, Feb 18 CW – Image and description of completed classwork
I glued together the base and base verts for my LED Lamp. I put in the things that line up the wire for the LED Lamp that go on the lower arm.
Wed, Feb 18HW – Image and description of completed homework
I figured out how to make a design in Photoshop and created a mountain line.
Mon, Feb 16 CW – Image and description of completed classwork
I Printed out and glued my pencil box, glued the metal plates onto the base verts for the LED Lamp, and reprinted the back and right triangle for the Desktop Organizer.
Mon, Feb 16 HW – Image and description of completed homework
I created my Adobe Photoshop account and created a folder for this class. I started a project, but realized it was in Adobe Express, not Photoshop.
Week 9
Thu, Feb 12 CW – Image and description of completed classwork
I glued together my upper arm. I printed out the base plate and the 2 base verts for the LED Lamp. I made the joint for the 2 inside faces for the Pencil Box.
Thu, Feb 12 – Image and description of completed homework
I made the 2 inside faces by using the outside face sketch. I used combine to cut out the holes on the outside and bottom faces but am stuck on how I should have the 2 inside faces cut each other.
Tue, Feb 10 CW – Image and description of completed classwork
I created the sketches, extruded them, and combined the Right, left, front, back, and bottom sides of the pencil box.
Tue, Feb 10 HW – Image and description of completed homework
I have downloaded the Adobe Creative Cloud, and installed photoshop.
Week 8
Sat, Feb 7 CW – Image and description of completed classwork
I printed out the pieces for my Desktop Organizer. I will have to reprint my Large Triangle due to the joint not fitting in the hole.
Sat, Feb 7 HW – Image and description of completed homework
None. I am done making the virtual models of the Desktop Organizer and the LED Lamp.
Thu, Feb 5 CW – Image and description of completed classwork
I had to redo the large triangle, bottom, front vert, and small triangles due to issues with the joints.
Thu, Feb 5 HW – Image and description of completed homework
None. I finished all virtual models and am working on printing them out and constructing them.
Week 7
Thu, Jan 29 CW – Image and description of completed classwork
I printed out components for Desktop organizer. My first print included construction lines and had to be discarded.
Thu, Jan 29 HW – Image and description of completed homework
None. I finished the DO 3D Render on Fusion.
Tue, Jan 27 CW – Image and description of completed classwork
I made the four verticals and fixed the front vert.
Tue, Jan 27 HW – Image and description of completed homework
I tried to make the four verticals, but couldn’t because I forgot how to properly project and extrude the needed area
Week 6
Fri, Jan 23 CW – Image and description of completed classwork
I created the back vert, front vert, and large triangle
Fri, Jan 23 HW – Image and description of completed homework
I cut out the ridges so the back fits into the design.
Wed, Jan 21 CW – Image and description of completed classwork
I created the right side, front side, and back side of the organizer.
Wed, Jan 21 HW – Image and description of completed homework
I finished and extruded the left side for the desk organizer.
Week 5
Sat, Jan 17 CW – Image and description of completed classwork
I completed the left side sketch for the desk organizer
Sat, Jan 17 HW – Image and description of completed homework
I completed the Base
Thu, Jan 15 CW – Image and description of completed classwork
I created the base plate and base Verts and jointed them to the lower arm
Thu, Jan 15 HW – Image and description of completed homework
None.
Tue, Jan 13 CW – Image and description of completed classwork
I printed out my lower arm and added the magnets and metal plates.
Tue, Jan 13 HW – Image and description of completed homework
None.
Week 4
Fri, Jan 9 CW – Image and description of completed classwork
I had an away hockey game, so I wasn’t in class
Fri, Jan 9 HW – Image and description of completed homework
I started working on the base plate sketch
Wed, Jan 7 CW – Image and description of completed classwork
I tried to print out my lower arm but ran into problems that ran out the 50 minute class. I have put the file on the computer to be printed out next class.
Wed, Jan 7 HW – Image and description of completed homework
I joined together the lower arm and made the holes and cutouts for the lower horizontal
Winter Break 12/19/25 – 1/5/26
Week 3
Tues, Dec 18 CW – Image and description of completed classwork
I added the rest of the holes for the lower arm horizontal and started the base plate.
Thu, Dec 18 HW – Image and description of completed homework
None
Tues, Dec 16 CW – Image and description of completed classwork
I sanded down the sides of the upper arm and put in the magnets and epoxy.
Tue, Dec 16 HW – Image and description of completed homework
I extruded the lower arm side, made a copy, and assembled the lower arm with the metal plates
Week 2
Fri, Dec 12 CW – Image and description of completed classwork
I printed out my upper arm.
Fri, Dec 12 HW – Image and description of completed homework
I created the sketch for the lower arm side
Wed, Dec 10 CW – Image and description of completed classwork
Learned how to use the laser cutter
Wed, Dec 10 HW – Image and description of completed homework
I created and extruded the horizontal upper arm component
Mon, Dec 8 CW – Image and description of completed classwork
I finished creating the upper arm side and made a copy and jointed it together.
Mon, Dec 8 HW – Image and description of completed homework
I created the sketch for the upper side arm component using circles, and lines that I made tangent to them.
Week 1
Fri, Dec 5 CW – Image and description of completed classwork
I created a box with a lid and handle, and put a hole and a new design on the side of the box.
Fri, Dec 5 HW – Image and description of completed homework
I watched all three videos and now know how to document my progress as well as upload screenshots of my work.
Wed, Dec 3 CW – Image and description of completed classwork
I learned how to insert and create shapes in Fusion 360.
Wed, Dec 3 HW – Image and description of completed homework