Week 12
Wed, Mar 4 CW – Image and description of completed classwork
NO CLASS
Tue Mar 3 CW – Image and description of completed classwork
NO CLASS
Mon, Mar 2 CW – Image and description of completed classwork
No CLASS
Week 11
Sat, Feb 28 CW – Image and description of completed classwork
Sat, Feb 28 HW – Image and description of completed homework
No homework
Thur Feb 26 CW – Image and description of completed classwork
In class I finished cutting out and engraving my parts. I sanded them down afterwards and then I began to assemble and glue them together.
Thu, Feb 26 HW – Image and description of completed homework
I can’t do anything because my illustrator file is on the computer in GCAD and I don’t really have nothing else to do but print out the other parts. So there’s gonna be no picture here too.
Tue, Feb 24 CW – Image and description of completed classwork
I don’t have a image because I was rushing to get to our house meeting, I cut out some parts and spent most of my time fixing each layer and trying to make it see through, also fixing the sizes because one came out the wrong size. I even spent some time during consult to do this.
Tue, Feb 24 HW – Image and description of completed homework
I remade the car one because the contrast wasn’t enough and I sorted all the layers for printing by each ones quality Vector cut would be to cut holes and I chose raster engrave to make all the designs, but I might change it based on how it looks.
Week 10
Fri, Feb 20 CW – Image and description of completed classwork
In class I began to experiment using illustrator and the engraver setting on the laser cutter. I figured out that I have to give some pictures more contrast. I also began to learn about the different methods of printing, like raster, vector,
Fri, Feb 20 HW – Image and description of completed homework
For Homework I completed the Images on the sides of the pencil case.
Wed, Feb 18 CW – Image and description of completed classwork
I finally cut out and sanded down all my parts for the desktop organizer and I felt very happy that I finally completed it. I sadly didn’t take a photo in class of it because I was rushing to get to my other class.
Wed, Feb 18HW – Image and description of completed homework
I worked a little bit on the pencil case, I was experimenting with some designs in illustrator.
Mon, Feb 16 CW – Image and description of completed classwork
While I was waiting to cut out my parts I began to work on the pencil case and I made the model in fusion and I exported the dxf files to work on the vector designs on illustrator.
Mon, Feb 16 HW – Image and description of completed homework
After redoing the entire interior I finally fixed the problem and the design and now I’m ready to fabricate everything.
Week 9
Thu, Feb 12 CW – Image and description of completed classwork
After a little bit of trying to fix the current problem I had, i settled on going back to where I began and start with the four sides.
Thu, Feb 12 – Image and description of completed homework
I waited till class to work on it becuase I didn’t know how to fix my problem
Tue, Feb 10 CW – Image and description of completed classwork
I tried to fix the model, and I cut out some parts but I had more problems doing it.
Tue, Feb 10 HW – Image and description of completed homework
I worked on the model trying to fix my previous errors.
Week 8
Sat, Feb 7 CW – Image and description of completed classwork
I kept trying to fix the problems in class I made some good progress, I remade the back vertical and I use the combine tool to make sure it fit with the other parts. The front vertical and one of the sides I have to work on.
Sat, Feb 7 HW – Image and description of completed homework
fixing model, the bottom was made incorrectly
Thu, Feb 5 CW – Image and description of completed classwork
There were many mistakes that I had to fix, I didn’t get to all of them and I have to fix them to cut everything out. The mortices and tenons were not built correctly.
Thu, Feb 5 HW – Image and description of completed homework
Waiting to cut out my parts. Everything was done.
Week 7
Thu, Jan 29 CW – Image and description of completed classwork
I FINISHED THE ENTIRE THING and now ready to cut pieces.
Thu, Jan 29 HW – Image and description of completed homework
there was nothing needed to be done
Tue, Jan 27 CW – Image and description of completed classwork
I finished making the triangle divider part of the organizer and the base vertical as well as making the holes for the parts as well.
Tue, Jan 27 HW – Image and description of completed homework
No homework needed.
Week 6
Fri, Jan 23 CW – Image and description of completed classwork
I made the back of the organizer as well as the bottom.
Fri, Jan 23 HW – Image and description of completed homework
no homework needed
Wed, Jan 21 CW – Image and description of completed classwork
I worked further on the desktop organizer by completing the front of it and fixing up the sides.
Wed, Jan 21 HW – Image and description of completed homework
I separated the two sides of the desktop by around nine inches.
Week 5
Sat, Jan 17 CW – Image and description of completed classwork
WE STARTED TO WORK ON THE LEFT SIDE OF THE DESKTOP ORGANIZER!
Sat, Jan 17 HW – Image and description of completed homework
Optional hw
Thu, Jan 15 CW – Image and description of completed classwork
I Cut out the baseplate and began to assemble my lamp
Thu, Jan 15 HW – Image and description of completed homework
Waiting to cut out my baseplate
Tue, Jan 13 CW – Image and description of completed classwork
I glued my arms together and also epoxied my plate, I also got the file for the baseplate
Tue, Jan 13 HW – Image and description of completed homework
Week 4
Fri, Jan 9 CW – Image and description of completed classwork
I CUT out my lower arm and sanded it
Fri, Jan 9 HW – Image and description of completed homework
I made the bases and the plates using the extrude and project tool many times
Wed, Jan 7 CW – Image and description of completed classwor
I finished modeling the lower arm completely and I had it ready to cut. I also worked on the base and the vertical.
Wed, Jan 7 HW – Image and description of completed homework
COMPLETED THE LOWER ARM JOINERY using the project command, many lines, trim tool, combine tool. extrude. Also cut out holes, its not in the pic.
Winter Break 12/19/25 – 1/5/26
Week 3
Tues, Dec 18 CW – Image and description of completed classwork
We worked on making the lower arm horizontal
Thu, Dec 18 HW – Image and description of completed homework
Tues, Dec 16 CW – Image and description of completed classwork
we sanded down our arms and we also put on the magnets
Tue, Dec 16 HW – Image and description of completed homework
Week 2
Fri, Dec 12 CW – Image and description of completed classwork
Today we cut out our parts for the upper arm and began to work on finishing the lower arm.
Fri, Dec 12 HW – Image and description of completed homework
We connected the lower arm to the upper arm as well as the small plates in between by using the join command
Wed, Dec 10 CW – Image and description of completed classwork
We saved our sketch DXF files and learned how to move them into the computer for the lazer cutter, and we learned how to use the software and how to prepare the lazer cutter.
Wed, Dec 10 HW – Image and description of completed homework
We made our metal plates large and small, and also made. the lower arm side.
Mon, Dec 8 CW – Image and description of completed classwork
Today we finished the upper arm of our lamp, we duplicated the first side and spaces them out, we also used patterns to make the holes in our design.
Mon, Dec 8 HW – Image and description of completed homework
We used the project and extrude tool to make the joinery, and then used the combine and cut tool so that the joinery would fit the mortise.
Week 1
Fri, Dec 5 CW – Image and description of completed classwork
Today we learned how to make another box, a box with a lid, we learned how to extrude, sketch, and project.
Fri, Dec 5 HW – Image and description of completed homework
I learned how to make a sketch of one of the arms for the LED lamp project by utilizing the tangent command and the trim command, as well as the line and circle.
Wed, Dec 3 CW – Image and description of completed classwork
We installed fusion 360, we created our first 3d object in fusion and we learned how to upload our work into wordpress.
Wed, Dec 3 HW – Image and description of completed homework