Week 10
Fri, Feb 21 CW – image of work completed in class
IN class I started working on my phone case. The sketch is going very well.
In class today, I started on my pencil organizer.
Fri, Feb 21 HW – image of completed homework
For homework I continued working on re jointing all my components.
Wed, Feb 19 CW – image of work completed in class
In class I worked on jointing my piece together.
Wed, Feb 19 HW – image of completed homework
Mon, Feb 17 CW – image of work completed in class
In class today, I made a sketch for each part of the desktop organizer. I converted it all to DXF files, and I uploaded them to the hard drive. Unfortunately, I was unable to print today because I ran out of time.
Mon, Feb 17 HW – image of completed homework
I am finished with my Desk Top Organizer. I next will complete the pencil holder test, but I don’t have any dimensions so I will need to wait until class to complete it.
Week 9
Thur, Feb 13 CW – Image of work completed in class
In class, I finished my organizer. I made the little triangles without using the video. Next class or during Sunday consultation I will print it out.
Thur, Feb 13 HW – Image of completed homework
For homework, I correctly positioned the larger triangle. I used the combine tool to cut out the large triangle’s connecters, and I jointed the large traingle.
Tues, Feb 11 CW – Image of work completed in class
Tues, Feb 11 HW – Image of completed homework
In class today, I worked I extruded sides and fixed up my outer sides. I still need to make the small triangles, but on the bright side I was able to not restart because I figured out what went wrong.
Week 8
Sat, Feb 8 HW – image of completed in class
Somehow, I added the angle to a component, so I need to restart the entire project.
Sat, Feb 8 HW – image of completed homework
For homework, I started building the dividing triangle, but when I tried to extrude the entire right side would move instead of the triangle I made.
Thur, Feb 6 CW – image of work completed in class
In class today, I completed the entire frame of the box. I need to do the partition and print next class, then I will be done.
Thur, Feb 6 HW – image of completed homework
Week 7
Thur, Jan 30 CW – Image of work completed in class
In class today, I had some trouble extruding the front. For some reason, Fusion did not want to recognize the sides, so I had to get help extruding it. I just need to do the bottom of the organizer then the interior shelfs of it.
Thur, Jan 30 HW – Image of completed homework
For homework, I completed the back of my desk organizer. I don’t know what happened, but my front work from last class is gone. Hopefully I will be able to fix it, but I don’t know what happened.
Tues, Jan 28 CW – Image of work completed in class
In class today, I finished the sketch of my front face. I still need to extrude it, but the bulk of the front face work is done.
Tues, Jan 28 HW – Image of completed homework
For homework tonight, I started to create the sketch of the front side. I have difficulty copy and pasting the curve from the original sketch, so I was forced to stop at that step.
Week 6
Fri, Jan 24 CW – image of work completed in class
Fri, Jan 24 HW – image of completed homework
In class, we worked independently on our desk organizers. I separated the left side and the right side using the joint command. My next step will be to work on the front face.
Wed, Jan 22 CW – image of work completed in class
Wed, Jan 22 HW – image of completed homework
In class today, we started a new project: desk organizer. We are doing this so, next week, we can design a desk organizer for ourselves or someone in the house.
Week 5
Sunday, Jan 19 CW – images of work completed during consultation
Today, I went to GCAD and worked on the assembly and wiring of my lamp. I learned how to connect wires and not to use to much glue. I was able to complete my lamp.
Sat, Jan 18 CW – image of work completed in class
In class today, I finished printing out all of my parts. I will start assembling the lamp next class.
Sat, Jan 18 HW – image of completed homework
Thur, Jan 16 CW – image of work completed in class
In class today, Mr. Brodie shoed us how to wire all the electrical component. I sanded and wired my base, but was unable to assemble because I need to re-cut out the the lower arm because we ran out of wood.
Thur, Jan 16 HW – image of completed homework
Tues, Jan 14 CW – image of work completed in class
In class today, I printed out my lower arms and horizontal. As I was installing one of the arms, it broke, so I will need to re-print it next class.
Tues, Jan 14 HW – image of completed homework
Week 4
Fri, Jan 10 CW – image of work completed in class
In class, I worked on finishing up the base. Unfortunately, the line to print was to long so I wasn’t able to print this class, but all my part are ready.
Fri, Jan 10 HW – image of completed homework
For homework tonight, I started making the baseplate for the LED Lamp. I used many circle to make the bsae, along with trimming and not need lines in the base. In addition, we used the extrusion tool to cut instead of make a new body, which is something I don’t remember doing before.
Wed, Jan 8 -CW – image of work completed in class
During consultation and class, I completed the lower horizontal, I just need to extrude the holes in the horizontal’s face.
Wed, Jan 8 HW – image of completed homework
For homework tonight, we were supposed to create the horizontal piece for the lower arm. I had difficulty getting the horizontal to get to the midpoint of the lower arm.
Update: I figured out the issue was I still had the distance between the two object so they didn’t join together.
Week3
Thur, Dec 19 CWW – image of completed homework
In class, I began working on the horizontal arm.
Thur, Dec 19 HW – None
Wed, Dec 18 CW – image of work completed in class
In class today, we worked on glue our parts together, in addition to putting magnets in and using resin to leave set.
Wed, Dec 18 HW – image of completed homework
Mon, Dec 16 CW – image of work completed in class
I was able to print my upper segment of the lamp today. After printing, I used the sander to get rid of the scorch marks.
Mon, Dec 16 HW – image of completed homework
For homework, I worked on the lower part of the lamp. In addition, I made to metal discs that will separate the upper leg from the lower leg. I got better at the extrusion tool.
Week 2
Thur, Dec 12 CW – Image of work completed in class
I learned how to use the the lazer cutter today. I am still waiting to print my parts.
Thur, Dec 12 HW – Image of completed homework
Homework was to add the upper horizontal. I was able to complete this work in class.
Tues, Dec 10 CW – Image of work completed in class
In class today, we finished the arms of the LED light. I finished early, so I went ahead and completed the homework.
Tues, Dec 10 HW – Image of completed homework
For homework tonight, we began to start designing our lamp, following the steps in the video Mr. Brodie provided. I learned how to use the “trim” feature to get rid of any lines I didn’t need, and to use the “tangent constraints” so my lines would meet the sphere at one point but not overlap.
Week 1
Fri, Dec 6 CW – image of completed in class
We worked with the extrusion tool and we learned how to make holes. I am getting more comfortable with the Fusion program.
Wed, Dec 6 CW – image of work completed in class
We started to work with Fusion. One of the most important things we’ve learned so far is that “every part needs to be a separate component”.
